Mining Air Compressor for Heavy-Duty Mining Operations
Reliable Compressed Air Solutions for Rock Drilling, Jackhammers and Mining Equipment
Sollant provides high-performance mining air compressors designed for harsh mining environments. Our diesel-powered screw compressors deliver stable compressed air for rock drilling, pneumatic tools and mining operations.
Challenges in Mining Compressed Air Applications
Mining operations require a reliable and continuous compressed air supply to support critical processes such as rock drilling, blasting, underground mining, and pneumatic equipment operation. However, mining environments are among the most demanding working conditions, where air compressors must overcome extreme challenges including harsh environments, heavy workloads, and limited infrastructure.
Choosing the right mining air compressor is essential to maintain productivity, reduce downtime, and ensure safe and efficient mining operations.
🏔
Built for Harsh Mining Conditions
Dust, heat, vibration, and moisture can put extreme demands on compressor equipment. Heavy-duty construction and reliable components help maintain stable performance in demanding mining environments.
💨
High Air Demand for Drilling
Rock drills, DTH drilling rigs, and pneumatic tools require a continuous supply of compressed air. The right airflow and pressure help maintain drilling efficiency and productivity.
⛽
Reliable Air in Remote Locations
Mining sites are often far from reliable power infrastructure. Diesel-powered portable air compressors provide an independent compressed air source for remote drilling and quarrying operations.
⚙️
High-Pressure Drilling Requirements
Different drilling applications require different pressure levels. Sollant offers high-pressure air compressor solutions for demanding applications where standard pressure is not enough.
🔧
Continuous Heavy-Duty Operation
Mining operations cannot afford unnecessary downtime. Our compressor solutions are designed for long-hour, heavy-duty operation, helping reduce interruptions and maintain a reliable air supply.
🚜
Portable or Fixed Installation
Whether you need a mobile diesel compressor for drilling or a stationary screw compressor for an underground or surface mining station, Sollant can provide the right configuration for your application.
One Mining Site, One Right Solution
Whether you need a mobile diesel compressor for drilling, a fixed screw compressor for continuous air supply, or a high-pressure compressor for demanding applications, Sollant can configure the right solution for your operating requirements.
Tell us your required pressure, airflow, and application. Our engineers will recommend the right mining air compressor for your project.
Mining Air Compressor Solutions
Reliable Air Compressor Solutions for Mining & Drilling
From remote rock drilling to underground mining stations, Sollant provides portable diesel, stationary rotary screw, and high-pressure piston air compressors for demanding mining applications.
Choose the right compressor based on your required airflow, working pressure, power source, and installation environment.
01. Portable Diesel Screw Compressor
SLTDP-25/17
25 m³/min | 17 bar | Two-Stage
Best for: Mobile Mining & Drilling
- Diesel-powered for remote sites
- High airflow for demanding drilling
- 17 bar pressure for rock drilling
- Mobile design for flexible operation
- Built for harsh mining conditions
Ideal for: Rock Drilling · Blast Hole Drilling · Quarrying · Remote Mining
02. Fixed Oil-Injected Screw Compressor
SLT-110F
15.2–28.3 m³/min | 8 / 10 / 13 bar | 110 kW
Best for: Fixed Mining Stations & Continuous Air Supply
- Stable airflow for continuous mining operations
- 8 / 10 / 13 bar options for different air requirements
- 15.2–28.3 m³/min capacity for high air demand
- Suitable for surface and underground mining
- Designed for fixed air stations and pneumatic equipment
Ideal for: Underground Mining · Surface Mining · Fixed Air Stations · Mining Workshops · Pneumatic Equipment
03. High-Pressure Piston Compressor
SLTPH-2.0/30
0.6–6.0 Nm³/min | 3.0 / 4.0 MPa (30 / 40 bar)
Best for: High-Pressure Mining & Drilling
- 30 / 40 bar pressure for demanding applications
- 0.6–6.0 Nm³/min airflow for different drilling needs
- Low-speed operation for extended service life
- Designed for high-pressure drilling applications
- Reliable performance under demanding working conditions
Ideal for: High-Pressure Drilling · Deep-Hole Drilling · Heavy-Duty Pneumatic Equipment · Specialized Mining
Which Mining Air Compressor Do You Need?
Match Your Mining Application to the Right Compressor
The right mining air compressor depends on your application, required airflow, working pressure, power source, and installation conditions. Use the guide below to quickly identify the right solution.
| Your Requirement | Recommended Compressor | Why |
| Remote rock drilling | SLTDP-25/17 | Diesel-powered and portable for off-grid drilling sites |
| DTH drilling | SLTDP-25/17 | 25 m³/min airflow and 17 bar pressure |
| Quarrying & open-pit mining | SLTDP-25/17 | Easy to relocate between drilling areas |
| Underground fixed station | SLT-110F | Stable compressed air for continuous operation |
| Surface mining station | SLT-110F | 15.2–28.3 m³/min with 8/10/13 bar options |
| High-pressure drilling | SLTPH-2.0/30 | 3.0–4.0 MPa high-pressure output |
| Deep-hole / specialized drilling | SLTPH-2.0/30 | Heavy-duty piston design for high-pressure applications |
Need Help Choosing?
Not sure how much airflow or pressure your drilling equipment requires?
Send us your drilling equipment model, required pressure, airflow, and working conditions. Our engineers will recommend a suitable mining air compressor configuration.
Technical Specifications
Technical Specifications of Single-Stage Portable Diesel Air Compressors
Technical Specifications of Two-Stage Portable Diesel Air Compressors
High-pressure Piston Air Compressor (Two-stage)
High-pressure Piston Air Compressor (Three-stage)
Mining Applications
Rock Drilling
Compressed air powers pneumatic rock drills and drilling equipment used for rock breaking and exploration.
Recommended: SLTDP-25/17
Key Requirement: High airflow + stable pressure
DTH Drilling
Down-the-hole drilling requires a reliable supply of high-pressure compressed air to power the drilling system and remove cuttings from the borehole.
Recommended: SLTDP-25/17
Key Requirement: High pressure + continuous airflow
Underground Mining
Underground mining operations require dependable compressed air for drilling, pneumatic tools, and fixed working stations where equipment must operate reliably for extended periods.
Recommended: SLT-110F
Key Requirement: Stable continuous air supply
Quarrying & Open-Pit Mining
Quarry and open-pit drilling often requires portable compressed air equipment that can move between different drilling locations.
Recommended: SLTDP-25/17
Key Requirement: Mobility + diesel power + high-pressure air
Blast Hole Drilling
Blast hole drilling requires consistent compressed air to support drilling performance and maintain efficient removal of rock cuttings.
Recommended: SLTDP-25/17 / SLTPH-2.0/30
Key Requirement: Airflow + pressure matched to drilling equipment
High-Pressure Mining Applications
Specialized mining and deep-hole drilling applications may require compressed air at significantly higher pressures than standard industrial systems.
Recommended: SLTPH-2.0/30
Key Requirement: 3.0–4.0 MPa high-pressure air
Need a Compressor for Your Mining Application?
Every mine has different equipment, air demand, pressure requirements, and operating conditions.
Tell us your application, drilling equipment, required airflow, and pressure. Our engineers will recommend a suitable mining air compressor solution.
Sollant Provides Reliable Air Compression Solutions for Industries Across All Sectors.
Why Choose Our Mining Air Compressor
Designed for Harsh Mining Environments
Mining sites are known for extreme working conditions, including heavy dust, high temperatures, vibration, and outdoor exposure. Ordinary compressors may experience performance issues under these conditions.
Reliable Performance for Continuous Mining Operations
Mining production often requires equipment to operate for long hours with minimal interruption. Compressor downtime can directly affect drilling efficiency, project schedules, and operating costs.
Optimized for Mining Drilling Applications
Different mining operations require specific air pressure and airflow configurations. Selecting the wrong air compressor can lead to inefficient drilling, increased fuel consumption, and reduced productivity. Our technical team assists customers in selecting the appropriate air compressor specifications.
Customized Compressor Solutions
Each mining project has unique requirements based on factors such as geographical location, climatic conditions, production scale, and operating environment. Our goal is to provide the most suitable compressed air solution for every mining operation.
Reliable Performance for Continuous Mining Operations
Fuel consumption and maintenance costs are important considerations for mining companies. An inefficient compressor can increase operational expenses throughout its service life.By improving energy efficiency and reliability, our compressors help mining operators reduce total ownership costs.
Strict Quality Control and Manufacturing Standards
Reliable mining equipment requires strict manufacturing processes and quality management.Before delivery, compressors undergo comprehensive testing to ensure they meet performance requirements and provide reliable operation in real working environments.
Mining Air Compressor Project
African Mining Operations
Customer Needs: For the customer’s mining project in Africa, drilling operations required a continuous, round-the-clock supply of compressed air to power the drill rigs and maintain borehole wall stability. Previously, drilling efficiency was severely hampered by fluctuations in air supply pressure and difficulties in relocating equipment.
Solution: We provided a customized, diesel-powered mobile mining air compressor. The unit features an independent diesel power source, eliminating reliance on the mine’s electrical grid. Operating pressure was precisely calibrated based on the customer’s drill rig models and drilling depths to ensure a steady, reliable air supply. Additionally, the heavy-duty off-road chassis design allows for rapid relocation alongside the drill rigs, enabling the equipment to navigate the rugged terrain typical of African mining sites.
Project Results: Following the deployment of the equipment, the drilling rate increased significantly, unplanned downtime was drastically reduced, and the cost per meter drilled dropped effectively. The customer has now designated this solution as the standard configuration for new drill rigs.
Factory & Certifications
FAQ About Mining Air Compressors
The best mining air compressor depends on the application, required airflow, pressure, power source, and installation conditions. For remote rock drilling and DTH drilling, portable diesel screw compressors are often suitable. For fixed underground or surface stations, stationary rotary screw compressors are a reliable choice. High-pressure piston compressors are suitable for specialized high-pressure drilling applications.
The required compressor size depends on your drilling equipment, number of drills, required airflow, and working pressure. For example, the Sollant SLTDP-25/17 provides 25 m³/min at 17 bar and is designed for demanding rock drilling and DTH drilling applications. Send us your drilling machine model and air requirements, and our engineers can recommend the appropriate compressor size.
Mining drilling pressure depends on the drilling method and equipment. Different rock drills, DTH rigs, and specialized drilling systems require different pressure levels. Sollant offers mining compressors for applications from standard industrial pressures to 17 bar portable drilling compressors and 3.0–4.0 MPa high-pressure applications.
Yes. Diesel-powered portable air compressors are particularly suitable for remote mining and drilling sites where grid electricity is unavailable or unreliable. They provide an independent compressed-air source and can be moved between different drilling locations.
Portable mining compressors are designed for mobility and are commonly used for rock drilling, DTH drilling, quarrying, and open-pit mining. Stationary compressors are installed in fixed locations and are better suited for continuous compressed-air supply in underground or surface mining stations. The right choice depends on your application, power source, and site layout.
Yes. Sollant provides customized mining air compressor solutions based on airflow, pressure, power source, drilling equipment, installation conditions, and other project requirements. OEM and ODM services are also available for qualified projects.
Yes. Sollant supplies high-pressure air compressors for demanding mining and drilling applications. The SLTPH-2.0/30 can provide 3.0–4.0 MPa high-pressure air with an airflow range of 0.6–6.0 Nm³/min, making it suitable for specialized and high-pressure drilling applications.
Sollant mining compressor solutions are designed for demanding industrial applications where dust, heat, vibration, and long operating hours can affect equipment reliability. The compressor configuration can be selected according to the actual mining environment and operating conditions to help ensure reliable performance.
Request a Quick Quote Now
Order or No Order? We're here for you 24/7
