What causes high internal pressure in air compressors?

Excessive pressure inside the air compressor may be caused by many reasons. This article will introduce some common reasons for high internal pressure in the air compressor.

1. Filter failure: The filter is an important part of the air compressor. It can remove moisture, pollutants, etc. from the compressed air and protect the internal components of the air compressor from damage. If the filter fails or is not replaced regularly, it will cause the filter to fail, causing the internal pressure of the air compressor to increase.

2. Carbon deposits inside the air compressor: Over time, some carbon and dirt may accumulate inside the air compressor. These carbon and dirt will block the internal channels of the air compressor, causing the air to not flow smoothly, causing internal pressure. rise.

3. Air compressor valve problem: The regulating valves of the air compressor include pressure switches, throttle valves, safety valves, etc. If these components are improperly adjusted or malfunctioned, it may cause the internal pressure of the air compressor to be too high. For example, if the pressure valve is set too high, the working pressure of the air compressor will be higher than the original pressure, the air compressor will be overloaded, and the internal pressure of the air compressor will increase.

4. Air compressor leakage: Air leakage inside the air compressor is also a common cause of increased internal pressure. Air leakage may occur in pipes, valves, joints, etc. If there is too much air leakage, it will cause the internal pressure to increase.

In order to prevent the internal pressure of the air compressor from being too high, the air compressor needs to be inspected and maintained regularly to make it work properly. For example, regularly replace the filter, clean the carbon deposits and dirt inside the air compressor, check and maintain the air compressor regulating system, etc. At the same time, you also need to pay attention to regularly checking whether there are air leaks in pipes, valves and other components, and repair and replace them in time.