The correct start-up steps of the air compressor

Step 1: After the cold dryer is turned on normally, press the start button of the air compressor, the air compressor starts to unload and run, and the automatic operation indicator (11) lights up.

Step 2: After about 10 seconds, the air compressor starts to load and run, and the display information on the display changes from Automatically?unloaded? (automatically unloaded) to Automatically?loaded (automatically loaded).

Step 3: Open the manual drain valve of the air compressor and the cold dryer to discharge the dirt in the unit.

Step 4: Check that the indicators of the air compressor are within the safe value according to the machine identification (see the precautions for the safe value).

Step 5: Fill in the record form of the air compressor station to record various parameters and related contents.

Step 6: Start the machine for 7-10 minutes, the pressure of the air storage tank will gradually increase, and then open the manual drain valve under the air storage tank to discharge the sewage.

Step 7: The boot is over.

Sollant Group-Professional Compressed Gas Solutions Provider