How to maintain the filter element of the screw air compressor?

If the air compressed by the air compressor does not pass through the air filter, a lot of dust will remain in the body. The role of the air filter All kinds of particles and dust in the air will quickly enter the piston and cylinder. The air filter has not been maintained or replaced for a long time, which will also affect the air quality of the air compressor.

(1) Users who remove the air cleaner element will know that there will be a ring of bolts around the air cleaner element. At this point, carefully loosen the surrounding screws and take out the air filter element;

(2) After disassembly, carefully check the periphery of the old air filter element. If the surface of the filter element is seriously damaged or has oil on it, it needs to be replaced immediately. If there is no need to replace it, it is recommended to blow the soot under the pressure of 0.3MPa at this time. Be careful not to blow your mouth to your face or use other professional tools. It is recommended to use compressed air to clean the inside and outside of the air filter element of the screw air compressor without omission in all aspects;

(3)After completing these steps, restore the scene and check whether the value of the pressure switch is in the normal value.

Sollant Group-Professional Compressed Gas Solutions Provider