How to install and debug an oil-free water-lubricated air compressor?

After the oil-free air compressor is transported to the air compressor user through logistics, the next step is installation and commissioning. The following are the steps for installing and debugging an oil-free air compressor as a reference.
1. Choose a suitable installation location and ensure it is dry, well-ventilated and free from direct sunlight. There should be enough space around it to facilitate subsequent maintenance and operation.
2. Install the bracket: Install the air compressor bracket at the selected position and ensure that the bracket is firm and reliable.
3. Connect the power cord and grounding wire according to the electrical requirements of the air compressor. Make sure the wire connections are firm and comply with relevant standards.
4. Connect the pipes: Connect the air inlet and outlet pipes to the air compressor, and ensure that the connections are firm and reliable.
5. Add lubricant: If the air compressor needs to be filled with lubricant, please follow the manufacturer’s requirements.
6. Start the air compressor and check its operation. Observe the readings of the pressure gauge and other instruments to ensure that the air compressor is operating normally.
7. Adjust pressure: Use a pressure regulator to adjust the output pressure of the air compressor as needed.
8. Test the air compressor to ensure that its performance meets expected standards.
9. After completing the installation, clean and maintain it to ensure the stable operation of the air compressor.