What is the vibration of the centrifugal air compressor? –Shared by Sollant

As a high-efficiency, continuous and reliable air compression equipment, centrifugal air compressors are widely used in industrial fields. This article will introduce the working principle, advantages and importance of centrifugal air compressors in providing a stable and reliable air source and efficient operation. Centrifugal air compressors may generate some vibration during operation, but this vibration is usually normal. The following will introduce the vibration of the centrifugal air compressor and related control and management measures.

The vibration of centrifugal air compressor mainly comes from the following aspects:

1. Unbalanced main shaft and motor: If the main shaft and motor of the centrifugal air compressor are unbalanced, vibration will occur. Unbalance is usually caused by improper installation, failure of counterweight or aging of main shaft.
2. Gear transmission system: If the centrifugal air compressor adopts a gear transmission system, the mismatch or wear between the gears will cause vibration.
3. Bearing failure: If the bearing of the centrifugal air compressor is damaged or poorly lubricated, it will also cause vibration.
4. Loose and worn parts: During the operation of the centrifugal air compressor, if there are loose and worn parts, vibration will also occur.

In order to control and manage the vibration of the centrifugal air compressor, the following measures can be taken:

1. 1. Regular inspection and maintenance:

   Regularly check the balance and lubrication of each component of the air compressor, the main shaft, bearings and gears. If problems are found, repair or replace parts in time.

   2. Use balance technology:

   For unbalanced spindles and motors, dynamic balance technology can be used for correction to reduce vibration.

   3. Optimal design and installation:

   When installing a centrifugal air compressor, follow the manufacturer’s recommendations and ensure proper installation and alignment to reduce vibration.

   4. Control load balance:

   When the centrifugal air compressor is running, try to balance and control the load to avoid vibration caused by overload and instability.

   5. Use anti-vibration measures:

   Anti-vibration measures such as vibration isolation pads and shock absorbers can be used to reduce the transmission and impact of vibration.

   6. Conduct vibration monitoring:

   Use vibration monitoring equipment for regular vibration detection and analysis, and find and deal with abnormal vibration in time.

The vibration of the centrifugal air compressor can be controlled and managed through reasonable installation, regular maintenance and monitoring. Effectively controlling and managing vibration can not only extend the service life of the air compressor, but also improve the stability and operating efficiency of the equipment. During the use of centrifugal air compressors, attention should be paid to vibration management, and corresponding measures should be taken to reduce the impact of vibration as needed

The brand “Sollant” specializes in the R&D, manufacturing, sales and after-sales of compressors, oil-free compressors and hosts, special gas compressors, various air compressors and post-processing equipment. Provide customers with high-quality, environmentally friendly and Efficient air system solutions and fast and stable technical services. Sollant Corporation is customer-centric. Customer satisfaction is the purpose of our Sollant people.

Sollant Focus on Energy Saving.

Facebook

Home