What’s wrong with the air compressor not loading?

The screw air compressor is a widely used air compression equipment, but it may not be loaded during actual operation, causing impact and losses. The following will introduce the reasons and solutions for screw air compressor not loading, for reference only.

reason:

1. The compressor deflates, the machine automatically stops, and “empty return” occurs.

2. There is a problem with the air filter or air pressure switch, resulting in no loading.

3. The lubricating oil is not transported in place, causing the compressor to overheat and fail to work properly.

Solution:

1. First of all, if the machine is deflated, it will cause air back and affect the normal operation of the air compressor. It is necessary to first check whether the electrical part of the machine is normal, then find out the cause of the deflation and repair it. ,

2. If there is a problem with the air filter or air pressure switch, it needs to be replaced or repaired. Check whether the filter is clean or replace the filter, or repair or replace the air pressure switch.

3. When the machine is started again after being shut down for a long time, the lubricating oil may not be transported in place, causing the compressor to overheat. At this time, it is necessary to check whether the lubricating oil is sufficient or whether the lubrication system is normal.

In short, there may be many reasons why the screw air compressor is not loading, and the problem needs to be carefully investigated and the correct solution chosen. Only by correctly solving the problem can the air compressor work properly and take full advantage of its performance advantages.